Article - CS185027
The functionality comparison between Creo Mold Analysis (CMA) and Creo Mold Analysis Lite version (Free version)
Modified: 20-Jun-2024
Applies To
- Creo Parametric 3.0 M010 to 11.0
- PTC Creo Mold Analysis (CMA)
Description
- The functionality comparison between Creo Mold Analysis (CMA) and Creo Mold Analysis Lite version (Free version)
- The functionality comparison between Creo Mold Analysis (CMA) and Creo Mold Analysis Foundation (CMAF) (Free version)
- Some commands are grayed out during the use of CMA (Crero Mold Analysis) like OPTIONAL SIMULATIONS and MESH ELEMENT SIZE in Analysis Setup window
- Only a limited list of materials are available (complete list isn't available)
- Materials types missing in the Material Library tab
- In Creo Mold Analysis Report , in Result Advisor – Air trap page show: The result preview is not available in Creo Mold Analysis Lite version. Upgrade your version to see the result.
- What license is needed to access Air trap, volumetric shrinkage and fiber orientation results in CMA
- Analysis results are totally greyed out in CMA
- The number of gate can only be selected as 1 in the automatic gate creation dialog, it is not allowed to set multiple gates.
- The list of materials for Mold Analysis is very small
- In previous versions, there were 100's of materials to choose from
- Unable to get all Mold Analysis results
- When using CMA, the only results function available is the Melt Front Time
This is a printer-friendly version of Article 185027 and may be out of date. For the latest version click CS185027