Blogs First Fully 3D-Printed Jet Engine Showcases Designing for Additive Manufacturing Breakthrough

First Fully 3D-Printed Jet Engine Showcases Designing for Additive Manufacturing Breakthrough

May 14, 2023

PTC will showcase the world’s first fully 3D-printed jet engine at its LiveWorx 2023 premier event, beginning Monday, May 15, in Boston, Massachusetts. The micro turbojet engine, weighing approximately eight pounds and printed with Inconel, is a single, complete assembly, including all rotating and stationary components, and was designed in our Creo CAD software.

Designing and printing a fully self-supported micro turbojet engine, including the 50,000 RPM turbine, that requires no assembly, represents a significant breakthrough in designing for additive manufacturing. After all, a jet engine is one of the most powerful and complex things out there, between the performance requirements for operation and the intricacy of the components – many of which rotate or move in some way. But we’ve spent the last several years advancing our core design capabilities in Creo and the ability to transfer sophisticated designs directly to a 3D printing environment.

This proof point for additive manufacturing could have material impacts on the aerospace industry and how we think about manufacturing these kinds of micro turbojet engines. Today, these engines require complex assembly processes of many expensive parts, which puts customers directly in the crosshairs of supply chain dependencies, limited availability, and their manufacturers maintaining the right employee expertise to complete assemblies. With additive manufacturing, there is no assembly process, and there’s potential to substantially reduce the number of components used and tooling required for production. This brings down costs, reduces requirements down to a metal 3D printer, and opens the possibility of on-demand manufacturing directly at the customer site.

The jet engine project was conceived by Dr. Ronen Ben Horin, a VP of Technology at PTC and a Senior Research Fellow at Technion – Israel Institute of Technology and Beni Cukurel, an Associate Professor of Aerospace at Technion. The two brought together many years of deep scientific research in jet propulsion and engineering expertise in the design of advanced engines and designing for additive manufacturing.

When we spoke with Beni about the achievement, he acknowledged that it’s a rewarding accomplishment for him and Ronen, a culmination of many years of research while staying on top of advancements in the supporting technology. He’s pleased to see that their extensive knowledge and experience in jet propulsion could now result in a commercially viable way of producing these kinds of micro turbojet engines. He also credited Creo for being a powerful engineering system that’s capable of supporting their vision and this level of innovation.

Many of the Creo advanced design capabilities were used for the jet engine assembly, including:

  • Lightweight Design: Creo enables sophisticated lattice modeling and generative design for material and weight reduction while maintaining the same strength and performance of designs with more material and heavier weight.
  • Self-Supporting Geometries for 3D Printing: Beam-based lattices in Creo automatically optimize designs for printability. Creo also supports self-supported formula-driven lattices that can be paired with printability checks and modifiers to adjust the design for printing efficiency.
  • 3D Printing Equipment Interoperability: Creo is compatible with most 3D printing equipment for printing and post-processing. The 3D component design in Creo is critical for performing traditional machining for precise assembly. Creo provides a variety of formats, including 3MF, for sending 3D models to the market’s various printer technologies, while also allowing users to easily create associative models for machining operations. This micro-jet engine was printed with an EOS printer.

After LiveWorx, we’re taking our assembly on the road to the Paris Air Show from June 19-25.

PTC, LiveWorx, Creo and the PTC logo are trademarks or registered trademarks of PTC Inc. and/or its subsidiaries in the United States and other countries.
CTA Image

The Latest Advancements in Creo

See what's coming in Creo 10

Click Here
Steve Dertien

Steve Dertien is the chief technology officer and managing director of the Office of the Chief Technology Officer at PTC. In this role, Steve champions corporate technology strategy across PTC’s products including augmented and virtual reality, the industrial internet of things, software architecture, computer-aided design, and product lifecycle management. Steve also leads the innovation research lab and advanced technology development groups, where he evangelizes state-of-the-art advancements with PTC technology and the business advantages it can provide to PTC’s customers and global partner network.

Up Next