Article - CS24616
Unable to add locations on the "clicked" position on the network, it was was possible in Wildfire 4.0 with Offset fom Csys.
Modified: 01-Oct-2015
Applies To
Creo 1.0Description
Steps used in Wildfire 4.0:
- Location > Add, now click exact the postion were the new location has to be on the network
- Offset > Specify Dirs > DirsFromCsys and now select the top cabling csys
- Specify From > Select Pnt and select again the main csys
- Make Locs and 3 times ok (in the input command appears the offset positions in x,y and z of the clicked postion)
Using the Offset from Point in Creo 1.0 using a Csys as reference re-initialize the location placement to Csys origin and does not keep clicked position on the network.
- Location > Add, now click exact the postion were the new location has to be on the network
- Offset > Specify Dirs > DirsFromCsys and now select the top cabling csys
- Specify From > Select Pnt and select again the main csys
- Make Locs and 3 times ok (in the input command appears the offset positions in x,y and z of the clicked postion)
Using the Offset from Point in Creo 1.0 using a Csys as reference re-initialize the location placement to Csys origin and does not keep clicked position on the network.
This is a printer-friendly version of Article 24616 and may be out of date. For the latest version click CS24616