Article - CS350123
Unable to determine the negative and the positive side of a datum plane in Creo Parametric
Modified: 15-Dec-2024
Applies To
- Creo Parametric 8.0 to 12.4
- Not applicable to Creo Parametric 7.0 and earlier releases
Description
- Unable to determine the negative and the positive side of a datum plane
- Per default (without config.pro), Datum Direction displayed graphically seems to be always positive (even in the scope of a negative orientation)
- if in >File >Options >Entity Display, Display shaded datum planes is enabled (corresponding to "enable_legacy_datum_planes no*" in config.pro):
- Just after having disabled Show Datum Plane with a color fil, system displays the expected positive or negative direction
- But when model is rotated, the color remains unchanged (even when direction is supposed to be changed due to the new orientation)
- Unable to distinguish the color of a datum plane's positive and negative sides.
- The System Appearance -> Datum -> Negative side setting of the UI setting is invalid.
This is a printer-friendly version of Article 350123 and may be out of date. For the latest version click CS350123