Article - CS462346
Replace component in assembly by "New Copy" does not generate the Drawing Copy in Creo Parametric
Modified: 27-Aug-2026
Applies To
- Creo Parametric 11.0 to 13.4
- Not reproducible up to Creo Parametric 11.0.6.0
- Config options in session :
- rename_drawings_with_object both
- template_drawing <path of the drawing template>
- allow_default_templates yes
- drawing_name_sameas_model_name yes
Description
- Replace a Component with a New Copy does not generate associated drawings on disk like in past releases of Creo
- Replace component in assembly by New Copy does not generate the Drawing Copy
- When replacing a component in an assembly using the "Replace by New Copy" option, the corresponding drawing is not automatically created
- Expected behavior: a new drawing should be generated and saved
- Actual behavior: no new drawing is created or saved in the origin folder or workspace
- When Replace with a New Copy in assembly mode, the drawing is not copied on OK or Apply
This is a printer-friendly version of Article 462346 and may be out of date. For the latest version click CS462346