Article - CS45174
How to set default standard view orientation to Isometric or user defined in Creo Parametric
Modified: 19-Mar-2024
Applies To
- Creo Parametric 1.0 to 10.0
- Pro/ENGINEER and Creo Elements/Pro Wildfire 2.0 to Wildfire 5.0
fix z axis and rotate x,y.
It becomes obvious if we observe trimetric/isometric orientations..
what we are going to set x,y while rotate along z.
Description
- How to set default standard view orientation to Isometric or user defined
- How to change orientation from trimetric to isometric
- How to change orientation from trimetric to user defined
- How to change standard view orientation
- Can Default and Standard orientations be saved in a given object (a template file for instance)
- How to change the default orientation of the part
- What is the config option to change the default Orientation
- In the default isometric of Creo Parametric, the XZ plane is a horizontal plane, the X-axis direction is outward to the right, the Z-axis direction is outward to the left, and the Y-axis direction is upward.
- How to modify the default isometric drawing to: the XY plane is a horizontal plane, and the X axis The direction is to the right, the Y-axis direction is inward, and the Z-axis direction is upward. In this way, the directions of the UG coordinate system can be consistent?
This is a printer-friendly version of Article 45174 and may be out of date. For the latest version click CS45174