Article - CS404331
Unable to create a “Standard Hole” feature with “Tap” in an imported STEP assembly file in Creo Parametric
Modified: 01-Nov-2023
Applies To
- Creo Parametric 4.0 to 10.0
Description
- Unable to create a Standard Hole feature with Tap in an imported STEP assembly file
- Message "The clearance between the thread surface and the drilled hole is at the same order as the part accuracy. Set the absolute accuracy value to be smaller in order to overcome this issue" in Regeneration Failure Troubleshooter
This is a printer-friendly version of Article 404331 and may be out of date. For the latest version click CS404331