Article - CS37330
How to edit DXF_EXPORT.PRO file to map the color when exporting a drawing to DXF/DWG in Creo Parametric
Modified: 02-Jul-2025
Applies To
- Pro/ENGINEER and Creo Elements/Pro Wildfire 5.0
- Creo Parametric 1.0 to 11.0
Description
- How to edit DXF_EXPORT.PRO file to map the color when exporting a drawing into DXF/DWG
- How to permanently set color- and layer-mappings for File > Save A Copy > DXF/DWG
- Where are color-mappings and layer-mappings and whole DXF/DWG export configuration stored
- How to handle DXF/DWG export file text\intf_configs\dxf_export.pro
- Information regarding dxf_export.pro file
- How to mapp RGB colors
- When exporting DXF drawings of CREO drawings, the color in the drawing has been changed to other colors (not white), and the color of lines has become white after exporting DXF. Where are the properties of the DXF export environment configured?
- How to configure the color and line font when exporting drawing to DWG
- Is it possible to make sure the mapped color in DWG same as the Creo color if export drawing to DWG 14 version
This is a printer-friendly version of Article 37330 and may be out of date. For the latest version click CS37330