Article - CS275279
Center lines are not displayed while flattening the harness if config.pro option "combined_state_type" is set to "mbd"in Creo Parametric 4.0
Modified: 23-May-2019
Applies To
- Creo Parametric 4.0 M030 to M040
Description
- Center lines are not displayed while flattening the harness if config.pro option combined_state_type is set to mbd
- Using config.pro option combined_state_type to mbd with Supplemental Geometry combined state makes cable Center Line disappeared in graphics screen
This is a printer-friendly version of Article 275279 and may be out of date. For the latest version click CS275279