Article - CS20305
Tolerance mode and limit values are grayed out for dimension properties dialog box in drawing or solid in Creo Parametric
Modified: 09-Oct-2025
Applies To
- Pro/ENGINEER and Creo Elements/Pro Wildfire to Wildfire 5.0
- Creo Parametric 1.0 to 12.4
Description
- Tolerance mode and limit values are grayed out for dimension properties dialog box in drawing or solid
- Tolerance mode grayed out for dimension properties dialog box in drawing or solid
- How to show dimension tolerance in drawing
- The tolerance/dimension bound is grayed out
- Cannot access Upper and Lower Tolerance limits within dimension properties
- The dimension upper/lower limit does not change after changing the dimension
- Unable to change Tolerance mode in 3D modeling mode
- Unable to display tolerance in a drawing
- Limits dimension displays as a Nominal dimension in part mode
- Tolerances cannot be entered. How to add tolerances to dimensions in Creo Parametric 6.0?
- Tolerancing options not available in drawing
- Tolerance is grayed out in Creo 2d drawing, what settings control this behavior?
- When importing a drawing into another drawing the tolerances are removed from all imported dimensions.
- Not able to add tolerance to dimensions in the drawing; tolerance options are grayed out.
- Unable to create tolerance with the icon or command greyed out when creating dimension tolerances, which can be created by note only
- The old drawing has tolerances, but the new drawing has gray tolerances. Is there no other way but to save as the original drawing?
This is a printer-friendly version of Article 20305 and may be out of date. For the latest version click CS20305