Article - CS154497
Conversion radius option is inverted in the drawing in Creo Parametric 2.0
Modified: 13-Mar-2014
Applies To
Creo Parametric all releasesDescription
- The bending radius of converted solids are in the drawing shown as outside radius.
- Conversion radius option is inverted in the drawing.
- When the option is set to outside in part mode, the drawing dimension leader line points to the inside.
- When the option is set to inside in part mode, the drawing dimension leader line points to the outside.
This is a printer-friendly version of Article 154497 and may be out of date. For the latest version click CS154497