Article - CS386752
Differences in Hatching Visualization between Creo Parametric 9.0 and Creo Parametric 8.0
Modified: 03-Nov-2023
Applies To
- Creo Parametric 10.0.0.0 to 10.0.1.0
- Creo Parametric 9.0.0.0 to 9.0.6.0
- Creo+
Description
- Differences in Hatching Visualization between Creo Parametric 9.0 and Creo Parametric 8.0
- It appears that the default hatching size (or scale) has been decreased.
- Without properly converting the data, Creo is trying to use metric values in an inch drawing.
- Is there some way to configure this so the default hatching size in Creo 9.0 is similar to what was automatically generated in Creo 8.0?
- It seems impossible to get a good scaling number through the hatch_pattern_scale.cfg that allows the hatching previews to show correctly but then also to result in a cross section spacing that works well.
- Hatched ECAD Keep out feature on a PCB creates dense hatching in the drawing for Creo Parametric 9.0 than Creo Parametric 8.0.
This is a printer-friendly version of Article 386752 and may be out of date. For the latest version click CS386752