Why Analysts Love Creo Simulation Live

Written By: Dave Martin
  • CAD
  • 2/20/2020
  • Read Time : 3 min.
Man conducting a simulation study.

I started my engineering career as a structural analyst at Martin Marietta (later Lockheed Martin). Our teams and workflows were siloed. The designers, analysts, and manufacturing engineers worked in separate areas. Models were handed off from one group to another in a linear flow, usually with multiple cycles of the engineering design definition looped back to the design team.

After gaining some experience, often I would receive designs and know immediately, without performing an analysis, that the model would fail to meet its operating environment requirements. Common problems included:

  • The engineer didn’t design the components with the load paths in mind or had lightened the part by removing material in the load path.

  • Re-entrant corners wouldn’t have fillets, or the right sized fillets, to reduce stress concentrations.

  • Holes would be placed too close to edges, resulting in insufficient edge distance-to-diameter ratios.

  • Mass suspended across thin columns would result in “floppy” modes, and the part wouldn’t be as stiff as needed.

  • Parts made of dissimilar materials would be fixed together, and a temperature differential would result in significant stresses due to uneven expansion or contraction.

There are a number of common structural design mistakes that aren’t always obvious to the person creating the model.

Once we received a design, though, we were obligated to perform our finite element analysis (FEA) on it. We couldn’t return it to the design team without color contour plots, stress values, and factors of safety calculations.

This resulted in a lot of wasted time. We had to perform the following steps:

  1. De-feature the models to simplify the geometry.
  2. Apply idealizations like springs, mass elements, and rigid links. (We ran our analyses on servers and had strict limits on the number of nodes in the model.)
  3. Mesh the model.
  4. Define the load cases and boundary conditions.
  5. Set up and run the analysis.
  6. Post-process the results.

This was frustrating due to the time involved, especially when you knew the model was going to fail.

Creo Simulation Live alleviates these problems because engineers have a design assistant that allows them to perform analysis in real time as they are modeling. All the common problems listed above could be detected and solved early before involving an analyst.

Having a design assistant results in the following benefits to the product development process:

Accelerated analysis. Creo Simulation Live essentially eliminates the first three steps of the process listed above. Since it takes advantage of the computing power of your graphics processing unit (GPU), there’s less need to de-feature the model or apply idealizations. The ANSYS engine behind Creo Simulation Live meshes for you. This allows you to concentrate on optimizing your model while you are designing.

Fewer design iterations and loops. By performing simulation simultaneously with design, engineers can solve common problems like load paths and stress concentrations early. They can visualize and address these issues before handing off the designs to an analyst for the formal verification.

Structural and thermal analysts can focus on the big problems. If design engineers can ensure that their component models can endure their environments, then professional analysts can make the most value of their time. If designers have already performed component and even lower-level subassembly analysis, then analysts can concentrate on validating and optimizing major subsystems and products.

Analysts love tools that solve problems before they reach their desks. Most people want to provide value at their jobs, and not hinder their teammates from doing so. By combining simulation with design early in the process, your team will be faster by eliminating iterations and allowing analysts to concentrate on the big problems they were hired to solve.

To find out if real-time design guidance is right for you, sign up for a free webcast, featuring Steelcase, and hear how this cutting edge technology helps design engineers create better products on their own terms.

Register for Fast & Functional webcast featuring Steelcase.

Tags:
  • CAD

About the Author

Dave Martin

Dave Martin is a former Creo, Windchill, and Mathcad instructor and consultant. After leaving PTC, he was the Creo specialist for Amazon; and a mechanical engineer, Creo administrator, and Windchill administrator for Amazon Prime Air. He holds a degree in Mechanical Engineering from MIT and currently works as an avionics engineer for Blue Origin. 


Martin is the author of the books Design Intent in Creo Parametric and Top Down Design in Creo Parametric--both available at www.amazon.com. He can be reached at dmartin@creowindchill.com.

Why Analysts Love Creo Simulation Live
With Creo Simulation Live, engineers detect and solve common problems early before involving an analyst. With this real-time simulation tool, engineers are able to accelerate analysis, reduce design iterations, and focus on bigger issues.