Article - CS259758
How to set the order of startup configuration in Creo Parametric
Modified: 29-Nov-2022
Applies To
- Creo Parametric 4.0 M010 to M110
- Creo Parametric 6.0.0.0 to 6.0.3.0
- Creo Parametric 1.0 to 3.0
- Creo Parametric 5.0
- Creo+
- Creo Parametric 1.0 to 9.0
Description
- How to set the order of startup configuration
- How does the order of startup configurations decided
This is a printer-friendly version of Article 259758 and may be out of date. For the latest version click CS259758