Article - CS58498
How to set model datum for geometric tolerance in drawing mode in Pro/ENGINEER, Creo Elements/Pro and Creo Parametric
Modified: 02-Sep-2013
Applies To
- Pro/ENGINEER Wildfire 5.0 all datecodes
- Creo Elements/Pro 5.0 all datecodes
- Creo Parametric 1.0 - 2.0 all datecodes
Description
How to set model datum for geometric tolerance in drawing mode
This is a printer-friendly version of Article 58498 and may be out of date. For the latest version click CS58498