Article - CS51614
Warning message "References to additional 3d geometry may not be made; please select again" in sketcher while adding constraints or dimensions in Creo Parametric
Modified: 27-Oct-2023
Applies To
- Pro/ENGINEER and Creo Elements/Pro Wildfire to Wildfire 5.0
- Creo Parametric 1.0 to 10.0
- Creo+
Description
- Warning message "References to additional 3d geometry may not be made; please select again" while adding constraints or dimensions
- Can not choose the edge as 'project' when updating Sketch. message log display: References to additional 3d geometry may not be made; please select again
This is a printer-friendly version of Article 51614 and may be out of date. For the latest version click CS51614