Article - CS385097
Incorrect material removal when switching the cycle to countersink in creo parametric
Modified: 03-Apr-2023
Applies To
- Creo Parametric 9.0 to 9.0.4.0
- Creo Parametric 10.0 to 10.0.0.0
- Creo Parametric 8.0 to 8.0.8.0
- Creo+
Description
Incorrect material removal when switching the cycle to countersink in creo parametric. If the same machining is converted to standard drilling, the material removal is correct
This is a printer-friendly version of Article 385097 and may be out of date. For the latest version click CS385097