1. ホーム
  2. サポート
Article - CS209448

XML for cables generated in Creo Schematics where the cond_id or spool_name parameter is not defined in the conductor datatable will not import into Cabling in Creo Parametric

Modified: 27-Oct-2021   


Applies To

  • Creo Parametric 3.0 M030
  • Creo Parametric 1.0 to 8.0

Description

  • XML for cables generated in Creo Schematics where the cond_id or spool_name parameter is not defined in the conductor datatable will not import into Cabling
  • Regression: File imports successfully into Creo Parametric 3.0 M020 or older
  • In the latest versions upon import a dialog opens:
!                          : Some of the data from the logical data file was not imported.
!                          :
!                          : Check that all parameters within the PTC Creo Schematics file
!                          : contain characters supported by PTC Creo Parametric.
!                          :
!                          : Do you want to review the report? 
  • A file logical_import_fail_log.inf.<version> is created
    • The errors logged in this file refer to the lines with the CONDUCTOR definition inside the spool information
  • When creating spools from the imported logical information, the spool is created with the correct number of conductors, but conductor parameters are missing           
This is a printer-friendly version of Article 209448 and may be out of date. For the latest version click CS209448