Article - CS181420
Engraving sequence on a closed contour with 2 passes unexpectedly plunges at CUT_FEED instead of PLUNGE_FEED in Creo Parametric 2.0
Modified: 21-Oct-2016
Applies To
- Creo Parametric 2.0 M010 to M130
Description
- Engraving sequence on a closed contour with 2 passes unexpectedly plunges at CUT_FEED instead of PLUNGE_FEED.
- This leads in the break of the tool during manufacturing
This is a printer-friendly version of Article 181420 and may be out of date. For the latest version click CS181420