Article - CS215025
Save fails with "Internal error: memory access violation" in NX when saving data to the workspace with Windchill Workgroup Manager for NX
Modified: 21-Mar-2016
Applies To
- Windchill PDMLink 10.2 M010 to M030-CPS10
- PTC Windchill Workgroup Manager
- Siemens NX 9.0
Description
- Upon saving data to the workspace NX may report "Internal error: memory access violation"
- NX syslog:
>>>> O/S ERROR: signal 11 caught in file "o:\ugnx90\ip19\src\part\no\ind\Part_BasicSaveManager.cxx" at line number 1672
D:\ptc\cache\wgm102m010\wldroot\.ws\en2k8-wnc-x24.ptcts.com\workspace1\0000000421.prt failed to save (when trying to save D:\ptc\cache\wgm102m010\wldroot\.ws\en2k8-wnc-x24.ptcts.com\workspace1\0000000421.prt) with code 11 "Internal error: memory access violation"
D:\ptc\cache\wgm102m010\wldroot\.ws\en2k8-wnc-x24.ptcts.com\workspace1\0000000421.prt failed to save (when trying to save D:\ptc\cache\wgm102m010\wldroot\.ws\en2k8-wnc-x24.ptcts.com\workspace1\0000000421.prt) with code 11 "Internal error: memory access violation"
This is a printer-friendly version of Article 215025 and may be out of date. For the latest version click CS215025