Demos, Tools & Tutorials

Manufacturing & Production - CAM

Pro/ENGINEER Production solutions enable manufacturers to create tooling, NC tool paths, and inspection programs in parallel with product design work. Learn about topics for leveraging digital models for production including:

Production
  • Tooling design, development, and analysis
  • Tool path creation
  • NC simulation, verification, optimization, and post-processing

Demos

  • Webcast Replay-High Speed Machining & Custom Prototype Manufacturing
    This webcast takes an in-depth look at how high-speed machining technology significantly aids in the success of companies that specialize in toolmaking, prototype-manufacture, and other precision machining applications.
  • 2 Axis Turning Demonstration
    In this demonstration of Pro/NC turning, you’ll see that Pro/NC is easy to use, fully associative, has unmatched capability for creating programs on families of parts, and allows programming to different dimensional tolerance limits. The demonstration follows an actual customer scenario to create a 2-axis lathe program on a cast part.
  • 3 Axis Milling in Wildfire 3.0 Demonstration
    This is a 3 Axis Milling demonstration based on Pro/ENGINEER Wildfire 3.0. A product expert takes you through the simple process of utilizing the powerful 3 Axis capabilities in Wildfire 3.0 and the benefits inherent to parametric, associative models created in Pro/ENGINEER. Vericut is also shown for part verification and machining vizualization.
  • 5 Axis Milling in Wildfire 3.0 Demonstration
    This is a 5 Axis Milling in Wildfire 3.0 Demonstration. A product expert takes you through the process of utilizing the 5 Axis capabilities in Wildfire 3.0 and the benefits inherent to parametric, associative models created in Pro/ENGINEER Wildfire 3.0.
  • Pro/VERIFY Demonstration
    Pro/VERIFY provides the capability to verify finished machined and molded parts. Combined with a laser scanner to generate a point-cloud, Pro/VERIFY allows the user to input the point-cloud and superimpose it on the original 3-D model. The system provides fit and orientation tools and then outputs deviation information graphically and in report form. These techniques confirm part and process accuracy, improving quality and identifying process deficiencies.
  • What’s New in Pro/NC with Wildfire 3.0
    This recorded webcast shows the Pro/NC features in Wildfire 3.0 including major enhancements to the user interface.

Tips & Techniques

Tutorials

Introduction to Mold Cavity Design
This tutorial will guide the new Pro/MOLDESIGN user through all the necessary steps of creating an injection mold cavity assembly.
Introduction to Using Mold Layout
This tutorial will review how to set up and use the Mold Layout catalog, and how to create a new moldbase assembly and associated features.
Analysis for Molded Parts
This tutorial will review some of the typical analysis that a molded or casted part designer might perform, including 2D and 3D thickness, draft, and waterline checks.