GCRI for Pro/ENGINEER
GCRI Download Registration
Thank you for your interest in GCRI (Granite Cross Release Interoperability) for Pro/ENGINEER. You may now download the GCRI plug-in using the appropriate link per your operating environment. Select the plug-ins for the earlier platform from the table below.
| Wildfire 3.0 GCRI Support | |
| Wildfire 2.0 | Wildfire 1.0 |
| Windows XP 32 bit | No Support(2) |
| Windows XP 64 bit | |
| Red Hat Linux Enterprise 3.2 WS Edition | |
| HPUX 11 | |
| Solaris 64 bit 8, 9 and 10 | |
| Wildfire 4.0 GCRI Support | |
| Wildfire 3.0 | Wildfire 2.0 |
| Windows XP 32 bit | Windows XP 32 bit |
| Windows XP 64 bit | Windows XP 64 bit |
| HPUX 11 | HPUX 11 |
| Solaris 64 bit 8, 9 and 10 | Solaris 64 bit 8, 9 and 10 |
| Solaris AMD 64 bit 10 | No Support(3) |
| Wildfire 5.0 GCRI Support | |
| Wildfire 4.0 | Wildfire 3.0 |
| Windows XP 32 bit | Windows XP 32 bit |
| Windows XP 64 bit | Windows XP 64 bit |
| Solaris AMD 64 bit 10 | Solaris AMD 64 bit 10 |
Notes:
- GCRI is not supported within the same Pro/ENGINEER release.
- GCRI support is limited to the previous two releases, except in Wildfire 3.0 which is limited to the previous release.
- Pro/ENGINEER Wildfire 2.0 is not supported on Solaris AMD 64 bit OS. For more information about supported platforms, please refer to the hardware notes: http://www.ptc.com/partners/hardware/current/support.htm.
- GCRI functionality requires that the above .dll file match the platform of the system receiving the Pro/ENGINEER files.
- All versions of Pro/ENGINEER released after Wildfire 3.0 M220 include the above .dll files on the install disk. This file may be shared amongst installations if the platform of the installations are common.
