Hardware Notes - Pro/MECHANICA Wildfire
Last updated: April, 2004
| Platform Support |
| Partner |
Platform |
Operating System levels |
CPU |
C Compiler |
Fortran Compiler (see note a below) |
| Hewlett-Packard |
HP-UX 11id |
|
PA8000 or later |
ANSI C++( for Custom Loads)HP C 11.00.00 |
HP FORTRAN VB10.20.10 |
| HP-UX 11c |
Quality Pack Bundle December 2000
Quality Pack Bundle June 2000 |
| Microsoft
|
Windows XPb |
Base OS |
Intel Pentium/Xeon family |
MS Visual C++ V6.0 |
Compaq (DEC) Visual Fortran 6.0 |
| Windows 2000b, e |
Base OS, Service Pack 1, 2 & 3. |
| Windows NT 4.0 |
Service pack 5 or later |
| SGI |
IRIX |
IRIX64 6.5.10 |
Mips R8000 or later |
C V7.3.1.3+ |
FORTRAN V7.2+ |
| Sun |
Solaris |
2.6, 7, 8 and 9 |
UltraSPARC II or later |
C 6.1 |
FORTRAN 5.0 |
| NOTES |
- Fortran compilers are only required if you are running Fortran custom loads.
- Install and use the i486_nt executable.
- The following patch is required on HPUX 11.0 (PHSS_23536 - 3D common, PHSS_23544- OpenGL, PHSS_23546 - X Server runtime patches).
- The following patch is required on HPUX 11i(11.11) (PHSS_23536 - 3D common, PHSS_23544- OpenGL, PHSS_21816 - X Server runtime patches).
- The following patch is required on Windows 2000 (with Service Pack 1): (Q271976)
|
|
| Language Support |
| Supported Language |
Date Certified |
Release Datecode |
Comments |
| English |
16-Aug-2002 |
2002280 and higher |
|
| Chinese Simplified |
|
|
Not Supported |
| Chinese Traditional |
|
|
Not Supported |
| French |
17-Mar-2003 |
2003080 and higher |
|
| German |
17-Mar-2003 |
2003080 and higher |
|
| Italian |
|
|
Not Supported |
| Korean |
|
|
Not Supported |
| Japanese |
17-Mar-2003 |
2003080 and higher |
|
| Spanish |
|
|
Not Supported |
| NOTES |
- For more detailed information on localization for this product, please click here.
|
|
Supported MCAD Systems
You can integrate several MCAD systems with Pro/MECHANICA Wildfire. The following table lists the MCAD systems supported in Wildfire and the platforms they are supported on.
| Platforms |
CATIA Release 4.2.4 R2 (English only) |
Pro/ENGINEER Wildfire Date Code: 2002280 or higher |
Unigraphics Release 18.0 (English only) |
| HP (32 and 64 bit) |
X |
X |
X
See Note a |
| Intel-based PC (Windows NT, XP, 2000) |
|
X |
X
See Note a |
| SGI (64 bit) |
X |
X |
X
See Note a |
| Sun (32 and 64 bit) |
|
X |
X
See Note a |
| NOTES |
- Only supported for import of UG parts into Mechanica (transfer from UG using ugmech not supported)
|
|
Supported Finite Element Solvers
You can integrate several Finite Element Solvers with Pro/MECHANICA Wildfire for use in FEM mode. The following table lists the Finite Element Solvers supported in Wildfire and indicates the supported platforms.
| Platforms |
NASTRAN 2001 r3 |
ANSYS 6.1 |
| HP (32 and 64 bit) |
X |
X |
Intel-based PC
(Windows NT, XP, 2000) |
X |
X |
| SGI (64 bit) |
X |
X |
| Sun (32 and 64 bit) |
X
See note a |
X |
| NOTES |
- Sun (64 bit) version is not supported.
|
|
Supported Data Transfer Standards
Pro/MECHANICA supports the following standards for transferring data to and from MCAD programs:
| Platform |
DXF 13.0 |
IGES
5.2 |
VDA 2.0 |
| HP (32 and 64 bit) |
X |
X |
X |
| Intel-based PC (Windows NT, 2000, XP) |
X |
X |
|
| SGI (64 bit) |
X |
X |
X |
| Sun (32 and 64 bit) |
X |
X |
X |
|
