Hardware Support CADDS 5 R11 & Optegra 5

Last updated : December 2002
CADDS Version : CADDS 5i R11 2001800
Optegra Version: Optegra 5 2001800

The information contained in this document refers to the above releases. Please refer to the notes section of each table for exceptions.

SUN
CADDS 5 and Optegra Operating System Patches
Machine O/S Graphics Hardware Driver Version Date Supported or Certified Release Datecode Status
UNIX
UltraSPARC
Ultra 1
Ultra 2
Solaris 6, 7 TurboGX
TurboGX+
Creator
Creator 3D
      Supported
Ultra 10
Ultra 30
Solaris 6, 7, 8 Creator
Creator 3D
Elite3D
      Supported
Ultra 60
Ultra 80
Solaris 6, 7, 8 Creator
Creator 3D
Elite 3D
Expert 3D
      Supported
SunBlade-1000 Solaris 8 Elite 3D       Supported
NOTES
  • Graphics borads run in X11 & OGL mode unless otherwise stated
  • CADDS 5 OpenGL and XGL modes are not supported on the TurboGX and TurboGX+ cards
  • Solaris 8 does not support XGL Graphics
  • Solaris, CDE and OpenGL utilize 32mb of memory
  • DMENU (Solaris) support is available Refer to the following WEB site for SUN patch sets: http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access

Compaq
CADDS 5 and Optegra Operating System Patches
Machine O/S Graphics Hardware Driver Version Date Supported or Certified Release Datecode Status
UNIX
AlphaStation Series 200 Models 4/166, 4/233

Series 250 Model 4/266

Series 400 Model 4/233

Tru64 Unix V4.0D, v4.0E

X11 Only

ZLXp-E1       Supported
Tru64 Unix V4.0E, v4.0F

X11 and OpenGL

ZLXp-E3
ZLXp-L1
ZLXp-L2
      Supported
AlphaStation 255/233, 255/300, 500/333,500/400, 500/500, 600 5/266, 600 5/333, 600 5/500 Tru64 Unix V4.0D, v4.0E

X11 Only

PowerStorm 3D10, 3D30       Supported
Tru64 Unix V4.0D, v4.0E

X11 and OpenGL

PowerStorm 4D20, 4D40T, 4D50T, 4D60T

ZLXp-L1, ZLXp-L2

      Supported
Digital Personal Workstations 433au, 500au, 600au Tru64 Unix V4.0D, v4.0E

X11 Only

PowerStorm 3D30       Supported
Tru64 Unix V4.0D, v4.0E

X11 and OpenGL

PowerStorm 4D20, 4D40T, 4D50T, 4D51T, 4D60T       Supported
Workstation Professional XP1000 Tru64 Unix V4.0D, v4.0E

X11 Only

Power Storm 4D51T       Supported
NOTES
  • Digital UNIX, Motif and OpenGL take 24MB of memory
  • DEC ULTRIX O/S Not Supported
  • All Workstations also require Open3D v4.4 or higher
  • DMENU (Digital UNIX) Support NOT Available. Refer to the following WEB site for Compaq patch sets: http://ftp.support.compaq.com/patches/.new/unix.shtml

HP
CADDS 5 and Optegra Operating System Patches
Machine O/S Graphics Hardware Driver Version Date Supported or Certified Release Datecode Status
UNIX
HP 9000
710, 712, 715, 720, 725, 730, 735, 750, 755, J200, J210, C100, C110
HP-UX 10.20 8 plane on- CRX24, CRX24Z, CRX48Z, HCRX8, HCRX24, HCRX-24Z

Visualize 8, 24, 48

      Supported
HP 9000 B132, B132+, B160, B180L HP-UX 10.20, 11.0, 11i Visualize - fx2, fx4

Visualize 24

      Supported
HP9000 Models C160, C160L, C180, J282 HP-UX 10.20, 11.0, 11i Visualize 24, 48, 48XP       Supported
VISUALIZE UNIX Workstations C200, C240, C360, J2240, B132+, B180L HP-UX 10.20, 11.0, 11i Visualize fx2, fx4, fx6       Supported
VISUALIZE UNIX Workstations B1000, C3000, J5000, J7000 HP-UX 10.20, 11.0, 11i Visualize-fx Pro (fx2, fx4, fx6)       Supported
VISUALIZE UNIX Workstations B2000, C3600, J5600, J6000 HP-UX 10.20, 11.0, 11i Visualize-fx Pro (fxe, fx4, fx6)   April 2001 2001100 Supported
NOTES

SGI
CADDS 5 and Optegra Operating System Patches
Machine O/S Graphics Hardware Driver Version Date Supported or Certified Release Datecode Status
UNIX
Indy R5000 IRIX 6.2, 6.5
X11 Only
XGE (8)       Supported
IRIX 6.5

X11 & OpenGL

XGE (24)

XZ

      Supported
O2 R5000, R10000, R12000 IRIX 6.3, 6.5 CRM       Supported
Indigo2 R8000, R10000 IRIX 6.4, 6.5 XZ, Elan, EXTREME
Solid Impact
High Impact, Maximum Impact
      Supported
OCTANE R10000, R12000 IRIX 6.4, 6.5 SI/SE, SSI/SSE, MXI/MXE       Supported
NOTES
  • Graphics boards run in X11 & OGL mode unless otherwise stated
  • SGI IRIX V6.5, Indigo MAGIC and OpenGL take 25MB of memory
  • DMENU (SGI) Support NOT Available
  • Refer to the following WEB site for SGI patchsets. http://www.sgi.com/support/patch_intro.html

IBM
CADDS 5 and Optegra Operating System Patches
Machine O/S Graphics Hardware Driver Version Date Supported or Certified Release Datecode Status
UNIX
RS/6000 Series Workstations AIX 4.2.1, 4.3.2, 4.3.3 GXT255P, GXT500P
GXT550P, GXT800P
GXT800M, GXT1000M1
GXT1000M2, GXT2000P
GXT3000P
Power2
Power3
PowerPC 604e -166MHz and higher
    Supported
NOTES

Windows
CADDS 5 and Optegra Operating System Patches
Machine O/S Graphics Hardware Driver Version Tested Graphics Cards
Windows 2000 Windows NT 4.0
Windows
Minimum PC Requirement:

Intel Pentium 333 MHZ or greater

128 MB RAM

CD Drive

1 GB Disk (NTFS Format)

Win 98
(Optegra client only)

Win NT 4.0

Win 2000

2D Graphics Accelerator with min 4 MB VRAM   Diamond FireGL1

Compaq PowerStorm

Diamond FireGL1
Diamond FireGL2
Compaq PowerStorm
Intense 3D Wildcat 4110
3Dlabs Oxygen GVX1, VX1
ELSA GLoria II, GLoria
NOTES
  • Graphics borads run in X11 & OGL mode
  • DMENU (NT) Support NOT Available