Pro/PLASTIC Advisor Release 2000i²
Last Updated: July 25, 2000
| Pro/ENGINEER Datecode |
Moldflow Plastic Advisor Version |
| 2000010 - TBD |
3.2 |
| TBD |
4.0.6 |
|
| Platform |
Operating System |
Graphics |
| Intel based PC |
Windows 95 |
OpenGL 1.1 SVGA or equivalent 16 million color graphics screen, minimum resolution 1024 x 768 |
| Windows 98 |
OpenGL 1.1 SVGA or equivalent 16 million color graphics screen, minimum resolution 1024 x 768 |
| Windows NT 4.0* |
OpenGL 1.1 SVGA or equivalent 16 million color graphics screen, minimum resolution 1024 x 768 |
| Alpha based PC |
Windows NT 4.0* |
OpenGL 1.1 SVGA or equivalent 16 million color graphics screen, minimum resolution 1024 x 768 |
|
* SP3 req. for Version 3.0 & SP5 req. for Version 4.06
Notes Windows based platforms:
-
Intel based
-
200 MHz Pentium PC
-
Intel CPU (or 100% compatible)
-
DEC Alpha
| Platform |
Operating System |
Plastic Advisor Version |
Graphics |
| SGI |
IRIX 6.2, 6.3, 6.4, 6.5** |
3.2 |
X11 Motif OpenGL Resolution 1024 x 768 X Windows, 24 bit plane graphics and Z buffer for OpenGL |
| IRIX 6.2, 6.5** |
4.0.6 |
| HP 9000/700 |
HP-UX 10.2 |
3.2 |
X11 Motif OpenGL*** or PEX OpenGL requires hardware support on this platform. Resolution 1024 x 768 X Windows, 24 bit plane graphics and Z buffer for OpenGL |
| HP-UX 10.2 |
4.0.6 |
| IBM RS/6000 |
AIX 4.15, 4.2 |
3.2 |
X11 Motif OpenGL Resolution 1024 x 768 X Windows, 24 bit plane graphics and Z buffer for OpenGL |
| AIX 4.3 |
4.0.6 |
| SUN Ultra Sparc |
Solaris 2.6 |
3.2 |
X11 Motif OpenGL Resolution 1024 x 768 X Windows, 24 bit plane graphics and Z buffer for OpenGL |
| Solaris 2.6, 2.7 |
4.0.6 |
|
** Only R10000 supported for Plastic Advisor Version 4.06
*** OpenGL requires hardware support on these platforms
Notes UNIX based platforms:
-
Memory
- 128 MB
- 100 MB SWAP (minimum)
- Graphics
- resolution 1024 X 768 X Windows
- 24-bit plane graphics and Z buffer for OpenGL
Recommended Patches:
| HP-UX 10.2 |
| Latest Patch |
Original Patch |
Description |
| Workstation ACE |
|
Additional Core Enhancements for HP-UX 10.20 |
| PHSS_14262 |
PHSS_9527 |
HP aC++ corelibrary components (A.0.1.0.1) |
| PHSS_14262 |
PHSS_10053 |
Performance fix for aC++ dld.sl |
| PHSS_13900 |
PHSS_11399 |
B.10.00.00.AA PEX 5.1/Starbase/Hardcopy |
| PHSS_13900 |
PHSS_12455 |
B.10.00.00.AA PEX 5.1/Starbase/Hardcopy |
| PHSS_14716 |
PHSS_10765 |
B.10.00.00.AA did.sl(5) cumulative patch |
|
| IRIX 6.2 |
| Latest Patch |
Original Patch |
Description |
| 2777 | 1717 |
All platforms kernel rollup pach |
| 2000 | 2000 |
Posix 1003.1b support modules |
| 2824 | 1571 |
Libc rollup |
| 2420 | 1450 |
Libpthread |
| 2580 | 1746 |
XInternAtom fix for N32 version libX11.so |
| 3135 | 2044 |
rld rollup |
|
| IRIX 6.3 |
| Latest Patch |
Original Patch |
Description |
| 2801 | 1881 |
kernel rollup |
| 3135 | 2044 |
rld rollup |
|
| IRIX 6.4 |
| Latest Patch |
Original Patch |
Description |
| 2839 | |
kernel rollup |
| 3135 | 2044 |
rld rollup |
|
Note: If these patches
are not already loaded on your system you may find they have been superseded
and therfore no longer available. Contact the hardware vendor for
details of the replacement patch.
SGI N32 Subsystem Requirements
Pro/PLASTIC Advisor on SGI IRIX 6.2 & 6.3 requires the following subsystems listed below. To check that they are installed, use the IRIX command releases. If they are not installed, use the IRIX software manager to install the required subsystems. You must do this before installing Pro/PLASTIC Advisor.
| System |
Description |
| c_eoe |
Standard Execution Environment (C) |
| c_eoe.sw |
Standard Execution Software |
| c_eoe.sw.lib |
Standard Execution Libraries |
| c_eoe.sw32 |
Standard Execution Software (N32bit) |
| c_eoe.sw32.lib |
Standard Execution Libraries (N32) |
| eoe.sw32 |
IRIX N32 Libraries |
| eoe.sw32.gfx |
Graphics N32 Execution Environment |
| compiler_eoe.sw.lib |
IRIX Standard Execution Environment Software |
| compiler_eoe.sw32.lib |
IRIX Standard Execution Environment Software (N32) |
| ftn77_eoe |
Standard Execution Environment (Fortran77) |
| ftn77_eoe.sw |
Standard Execution Environment Software |
| ftn77_eoe.sw.lib |
Standard Execution Libraries |
| ftn77_eoe.sw32 |
Standard Execution Environment Software |
| ftn77_eoe.sw32.lib |
Standard Execution Libraries
(N32bit) |
| motif_eoe |
IRIX IM Execution Only Environment, 6.2(based on OSF/Motif 1.2.4) |
| motif_eoe.sw32 |
Execution Only Environment Software (n32) |
| motif_eoe.sw32.eoe |
IRIX IM Run-time Software (n32) (based on/Motif 1.2.4) |
| x_eoe |
X11 Execution Environment, 3.5 based on X11R6 |
| x_eoe.sw32 |
X11 n32 Execution Environment |
| x_eoe.sw32.eoe |
X11 n32 Execution Environment |
|
Solaris Pre-requisites
Motif RunTime Kit
Pro/PLASTIC Advisor on Solaris 2 requires the Motif 1.2.2
RunTime kit to be installed.
The error message below occurs if the Motif RunTime kit
is not installed, or is not in a standard directory.
ld.so.1: fatal:
libXm.so.3: Can’t open file: errno=2
The package name of the Motif RunTime kit is SUNWmfrun. Use
the following to determine if the kit is already installed:
#pkginfo
-1 SUNWmfrun
If the kit is not installed, the above command will generate
the following error:
ERROR:
information for “SUNWmfrun” was not found
In this case, you should install that package from your Sun Solaris installation media. Refer to your Sun Solaris Installation Guide. If the kit is already installed, it must be in a non-standard directory. You need to find out where the libXm.so.3 file resides. The default is /usr/dt/lib. To use the Xm library from a non-standard directory, you need to:
% setenv LD_LIBRARY_PATH
[directory path of libXm.so.3]
so that Pro/PLASTIC Advisor software knows where to find
the library.
OpenGL RunTime
Pro/PLASTIC Advisor requires OpenGL 1.1.1 runtime libraries.
You must first install the following Solaris packages:
-
SUNWglrt Solaris OpenGL Runtime Libraries
-
SUNWglwrt Solaris OpenGL Widget Library
-
SUNWglrtu Solaris OpenGL Platform Specific Runtime Libraries
-
SUNWffbgl Creator Graphics (FFB) OpenGL Support
