Hardware Notes - CADDS 5 Rev. 8.1
Last Updated: March 03, 1999CADDS 5 Rev. 8.1 Hardware Requirements
The following information for CADDS5 Rev. 8.1 is listing below:
- SUMMARY OF SUPPORTED PLATFORMS
- SUPPORTED PLATFORMS - LISTED BY VENDOR
- REQUIRED OPERATING SYSTEM PATCHES - LISTED BY VENDOR
- SUPPORTED PERIPHERALS
- TYPICAL CONFIGURATIONS
- HISTORY OF OPERATING SYSTEM SUPPORT
|
SUMMARY OF SUPPORTED PLATFORMS |
|
Digital UNIX V4.0A |
|
Hewlett-Packard HP-UX 10.20 |
|
IBM AIX/6000 V4.2 |
|
Silicon Graphics IRIX V6.2/6.3/6.4 |
|
Sun SPARC Solaris 2.5.1/2.6 |
|
Windows NT 4.0 (Alpha & Intel-based) |
|
Please refer to the CADDS 5 Rev 8.0 Configuration Guide for detailed information about product platform availability and prerequisites. |
|
SPARC Solaris 2.5.1/2.6 Supported Platforms for CADDS 5 Rev. 8.1 |
||||
|
|
SS5: M70, M85,M110 SS20: M5x, M61, M71, HS111, HS211 |
UltraSPARC Ultra 1: M140, M170, M140E,M170E,M200E Ultra 2 |
Ultra30 Ultra60 |
Ultra 10 |
|
Memory · Minimum · Standard · Maximum Performance |
48MB 64MB
128MB |
64MB 96MB
128MB |
64MB 96MB
128MB |
64MB 96MB
128MB |
|
Disk |
1 GB |
1 GB |
1 GB |
1 GB |
|
Monitor |
19" |
19" |
19" |
19" |
|
Graphics Boards Run in X11 & OGL Mode - Unless Noted |
SX1 (SS20 Only) TurboGX, TurboGX+, ZX, TurboZX |
TurboGX (M140&170 Only) TurboGX+(M140&170 Only)
Creator (M140E,M170E&Ultra2 Only)
Creator 3D (M170E&Ultra2 Only ) |
Creator Creator 3D Elite 3D |
Creator Creator 3D Elite 3D |
|
OS |
Solaris 2.5.1/2.6 |
Solaris 2.5.1/2.6 |
Solaris 2.5.1/2.6 * Solaris 2.5.1 HW 11/97 *Solaris 2.6 HW3/98 |
Solaris 2.5.1 HW 11/97 Solaris 2.6 HW3/98 |
|
||||
|
NOTES: · Solaris 2.x, CDE and OpenGL takes 32MB of the memory shown above. · The IPX, SS2, SS10, Classic and LX are supported on Solaris 2.5.1. · Not Supported - SS1, SS1+, IPC, 40C, 45S, GA3, GA4 · Dial Box (Solaris 2.x) - Supported in both Parametric and Explicit environments. · Spaceball Input Device (Solaris 2.x) - Supported in both Parametric and Explicit environments. · C Size Tablets (Solaris 2.x) Support is available (Explicit Environment Only). · DMENU (Solaris 2.x) Support is Available. · 470, 490, 670, 690 and SC1000 are supported as file servers only and not as CADDS workstations. |
||||
|
Digital UNIX V4.0 Supported Platforms for CADDS 5 Rev. 8.1 |
||||
|
|
Series 3000 700, 900 AXP |
AlphaStation Series 200 Model 4/166 Series 200 Model 4/233 Series 250 Model 4/266 Series 400 Model 4/233 |
AlphaStation 255/233 AlphaStation 255/300 AlphaStation 500/333 AlphaStation 500/400 AlphaStation 500/500 AlphaStation 600 5/266 AlphaStation 600 5/333 AlphaStation 600 5/500 |
Digital Personal Workstations 433au 500au 600au |
|
Memory · Minimum · Standard · Maximum Performance |
64MB 96MB
192MB |
64MB 96MB
192MB |
64MB 96MB
192MB |
64MB 96MB
192MB |
|
Disk |
1 GB |
1 GB |
1 GB |
1 GB |
|
Monitor |
19" |
19" |
19" |
19" |
|
Graphics Boards (X11 Only) |
ZLX-E1 |
ZLXp-E1 |
PowerStorm 3D10 PowerStorm 3D30 |
PowerStorm 3D30 |
|
Graphics Boards (X11 and OpenGL) |
ZLX-E3 ZLX-L1 ZLX-L2 ZLX-M1 ZLX-M2 |
ZLXp-E3 ZLXp-L1 ZLXp-L2 |
PowerStorm 4D20 PowerStorm 4D40T PowerStorm 4D50T PowerStorm 4D60T ZLXp-L1 ZLXp-L2 |
PowerStorm 4D20 PowerStorm 4D40T PowerStorm 4D50T PowerStorm 4D60T |
|
OS |
Digital UNIX V4.0a |
Digital UNIX V4.0a |
Digital UNIX V4.0a |
Digital UNIX V4.0c |
|
· Digital UNIX V4.0, Motif V1.2.4 and OpenGL takes 24MB of memory shown above · DEC ULTRIX O/S Not Supported · All Workstations also require Open3D v4.4 or higher · Dial Box (DEC) - Supported in both Parametric and Explicit environments. · Spaceball Input Device (DEC) - Supported in both Parametric and Explicit environments. · C Size Tablets (DEC) Not Supported. · DMENU (DEC) Support NOT Available. |
||||
|
Hewlett-Packard HP-UX 10.20 Supported Platforms for CADDS 5 Rev. 8.1 |
||||||
|
|
712/60 712/80 712/100 |
715/33,715/50 715/75,725/50 725/75 735/99,735/125 755/99,755/125 |
715/64,715/80 715/100, 715/100XC,725/100 |
C100, C110, J200, J210 |
B132L, B160L, C160,C180, K460 |
B180, C200, C240 C360, J2240 |
|
Memory · Minimum · Standard · Maximum Performance |
48MB 64MB
128MB |
48MB 64MB
128MB |
48MB 64MB
128MB |
48MB 64MB
128MB |
48MB 64MB
128MB |
48MB 64MB
128MB |
|
Disk |
1 GB |
1 GB |
1 GB |
1 GB |
1 GB |
1GB |
|
Monitor |
19" |
19" |
19" |
20" |
20" |
20" |
|
Graphics Boards (X11 & OGL) |
8 plane on-board |
8 plane (715 only) CRX24 CRX24Z CRX48Z |
8 plane on-board HCRX8 HCRX24 Visualize 8 CRX48Z HCRX8Z HCRX24Z Visualize 24, 48 |
8 plane on-board Visualize HCRX8Z HCRX24Z Visualize 24, 48 Visualize 48XP |
Visualize 8, 24, 48 Visualize 48XP |
fx2, fx4, fx6
Requires ACE |
|
OS |
HP-UX 10.20 |
HP-UX 10.20 |
HP-UX 10.20 |
HP-UX 10.20 |
HP-UX 10.20 |
HP-UX 10.20 |
|
· HP-UX 10.20, OpenGL and PEX take 30MB of the memory shown above. · 8 plane Graphics Boards may be accelerated in software with HP’s PowerShade Software. · Dial Box (HP) - Supported in both Parametric and Explicit environments. · Spaceball Input Device (HP) - Supported in both Parametric and Explicit environments. · C Size Tablets (HP) Support is Available (Explicit Environment Only). · DMENU (HP) Support is Available (Order Patch # HPDM5.1.1 from Services). |
||||||
|
SGI IRIX V6.2/6.3/6.4 Supported Platforms for CADDS 5 Rev. 8.1 |
||||
|
|
Indy R5000PC R5000SC |
O2 R5000PC R5000SC R10000 |
Indigo2 R4000/4400 R4600, R10000 |
OCTANE R10000 (175 or 195 MHz) |
|
Memory · Minimum · Standard · Maximum Performance |
48MB 64MB
256MB |
48MB 64MB
1000MB |
48MB 64MB
512MB |
48MB 64MB
1000MB |
|
Disk Minimum Maximum |
1 GB 4 GB |
1 GB 4 GB |
1 GB 12 GB |
1 GB 27 GB |
|
Monitor |
17", 20" |
20" |
20", 21" |
20", 21", 24" |
|
Graphics Boards (X11 Only) |
XGE (8) |
|
|
|
|
Graphics Boards (X11 & OpenGL) |
XGE (24) XZ |
O2 Graphics |
XL, XZ, EXTREME, Solid Impact, High Impact, Maximum Impact |
Solid Impact, High Impact, Maximum Impact |
|
OS |
IRIX 6.2 |
IRIX 6.3 Only |
IRIX 6.2 |
IRIX 6.4 Only |
|
· SGI IRIX V6.2/6.3, Indigo MAGIC and OpenGL takes 25MB of the memory shown above. · R4000/4400 Indy & Indigo, as well as, R4600SC Indy is supported running IRIX 6.2. · Dial Box (SGI) - Supported in both Parametric and Explicit environments. · Spaceball Input Device (SGI) - Supported in both Parametric and Explicit environments. · C Size Tablets (SGI) Not Supported. · DMENU (SGI) Support NOT Available. |
||||
|
IBM AIX/6000 V4.2 Supported Platforms for CADDS 5 Rev. 8.1 |
|||||
|
PowerStation |
43P-140 43P-240 |
40P, ,43P-100, 43P-120, 43P-133 |
41T, 42T |
3AT, 3BT, 3CT |
300 Series |
|
CPU Type |
166mhz, 200Mhz, 233mhz |
POWER PC |
POWER PC |
POWER2 |
POWER |
|
Memory · Minimum · Standard · Maximum Performance |
48MB 64MB
128MB |
48MB 64MB
128MB |
48MB 64MB
128MB |
48MB 64MB
128MB |
48MB 64MB
128MB |
|
L2 Cache |
1 MB |
512K standard |
512K optional |
2 MB optional |
N/A |
|
Disk |
2 GB |
1 GB |
1 GB |
1 GB |
1 GB |
|
Monitor |
15", 17", 20" |
17", 19", 20" |
17", 19", 20" |
17", 19", 20" |
15", 17", 20" |
|
Graphics Boards All Run in X11 and OpenGL Unless Noted (See Note 1) |
GXT150P1 E15 standard1 S151 GXT500P GXT550P GXT800P GXT1000M1 GXT1000M2 |
GXT150P1 E15 standard1 S151 GXT500P GXT550P GXT800P GXT1000M1 GXT1000M2 |
Gt4e, Gt4xi(8) 1 Gt4xi(24) GXT150L (std) 1 GXT150M1 GXT155L1 GXT500 (8) 1 GXT500 (12) GXT500D GXT1000M1 GXT1000M2 |
Gt4e1 Gt4xi(8) 1 Gt4xi(24) Gt4i1 GXT150M (std) 1 GXT1000M1 GXT1000M2 |
Gt4e1 (std 37T) Gt4xi(8) 1 Gt4xi(24) GXT1000M1 GXT1000M2 |
|
OS |
AIX 4.2 |
AIX 4.2 |
AIX 4.2 |
AIX 4.2 |
AIX 4.2 |
|
1 = Runs in X11 Mode only |
|||||
|
· Dial Box (IBM) - Supported in both Parametric and Explicit environments. · Spaceball Input Device (IBM) - Supported in both Parametric and Explicit environments. · C Size Tablets (IBM) Not Supported. · DMENU (IBM) Support NOT Available. |
|||||
|
Windows NT 4.0 Supported Platforms for CADDS 5 Rev. 8.1 |
|
REQUIRED OPERATING SYSTEM PATCHES - LISTED BY VENDOR
Sun
The following operating system patches and operting system software clusters are required. You must install the operating system software cluster before you install the patch.
|
Solaris 2.6 |
|||
|
Patch |
OS Software Cluster |
Cluster Description |
Patch Description |
|
105284-04 |
|
|
Motif runtime kit patch |
|
105360-09 |
|
|
Creator/FFB Graphics patch |
|
Solaris 2.5.1 |
|||
|
Patch |
OS Software Cluster |
Cluster Description |
Patch Description |
|
103368-03 |
SUNWxgldg |
XGL Generic Loadable Libraries |
XGL & X11 patch |
|
|
SUNWxglrt |
XGL Runtime Environment |
|
|
103461-13 |
|
|
Corrects CDE "snapshot" problem |
|
105790-03 |
SUNWffb |
Creator Graphics (FFB) system software |
Creator 3D patch |
|
|
SUNWffbcf |
Creator Graphics (FFB) configuration software |
|
|
|
SUNWffbw |
Creator Graphics (FFB) window system support |
|
|
|
SUNWffbxg |
Creator Graphics (FFB) XGL support |
|
|
|
SUNWv1xi1 |
VIS/XIL support |
|
|
103566-08 |
SUNWxwplt |
X Windows Platform Software |
OpenWindows 3.5.1 X Server |
|
|
SUNWxwslb |
W Windows static/lint libraries |
|
|
104589-01 |
SUNWxwpsr |
Sun4u-platform specific X server tilter modules |
OpenWindows 3.5.1 X Server |
SGI
The following operating system patches are required for SGI workstations.
|
IRIX 6.2 & IRIX 6.3 |
|
|
Patch |
Patch Description |
|
1345 |
For prgramming customers. Fixes compiler core dump problem. |
|
HISTORY OF OPERATING SYSTEM SUPPORT |
|||||
|
|
CADDS 5 6.1.5 |
CADDS 5 7.0 |
CADDS 5 7.1.1 |
CADDS 5 8.0 |
CADDS 5 8.1 |
|
Operating System |
|
|
|
|
|
|
Sol 1.1.2 |
X |
X |
X |
|
|
|
Sol 2.3 |
|
|
|
|
|
|
Sol 2.4 |
X |
|
|
|
|
|
Sol 2.5.1 |
X |
X |
X |
X |
X |
|
Sol 2.6 |
|
|
X |
X |
X |
|
|
|||||
|
Digital UNIX 3.2 |
X |
|
|
|
|
|
Digital UNIX 4.0 |
X |
X |
X |
X |
X |
|
|
|||||
|
HP-UX 9.05 |
X |
|
|
|
|
|
HP-UX 9.07 |
X |
|
|
|
|
|
HP-UX 10.10 |
X |
|
|
|
|
|
HP-UX 10.20 |
X |
X |
X |
X |
X |
|
|
|||||
|
IRIX 5.3 |
X |
|
|
|
|
|
IRIX 6.2 |
X |
X |
X |
X |
X |
|
IRIX 6.3 |
X |
X |
X |
X |
X |
|
IRIX 6.4 |
|
|
|
X |
X |
|
|
|||||
|
AIX 4.1.x |
X |
X |
X |
|
|
|
AIX 4.2.x |
|
|
|
X |
X |
|
AIX 4.3 |
|
|
|
X |
|
|
|
|||||
|
Windows NT 4.0 |
|
|
|
X |
X |
SUPPORTED PERIPHERALS FOR CADDS 5 Rev. 8.0
|
Tablet Support |
||
|
System |
Explicit |
Parametric |
|
Solaris 1.1.2 |
Yes |
No |
|
Solaris 2.5.1 |
Yes |
No |
|
Digital UNIX 4.0 |
No |
No |
|
HP-UX 10.20 |
Yes |
No |
|
IRIX 6.2/6.3 |
No |
No |
|
AIX 4.2 |
No |
No |
|
Dialbox Support |
||
|
System |
Explicit |
Parametric |
|
Solaris 1.1.2 |
Yes |
Yes |
|
Solaris 2.5.1 |
Yes |
Yes |
|
Digital UNIX 4.0 |
Yes |
Yes |
|
HP-UX 10.20 |
Yes |
Yes |
|
IRIX 6.2/6.3 |
Yes |
Yes |
|
AIX 4.2 |
Yes |
Yes |
|
Spaceball 3003 Support |
||
|
System |
Explicit |
Parametric |
|
Solaris 1.1.2 |
Yes |
Yes |
|
Solaris 2.5.1 |
Yes |
Yes |
|
Digital UNIX 4.0 |
Yes |
Yes |
|
HP-UX 10.20 |
Yes |
Yes |
|
IRIX 6.2/6.3 |
Yes |
Yes |
|
AIX 4.2 |
Yes |
Yes |
TYPICAL CONFIGURATIONS
|
Entry-Level Drafting |
|||||
|
System Memory Disk Graphics SPECint95 SPECfp95 |
Solaris 2.x SS5/85 64 MB 1 GB 20" S24 64* 55** |
DEC DPW 433au 128 MB 2.1 GB 21" 3D30 13 17 |
HP 712/80 64 MB 1 GB 20" Integ. 8 plane 97.1* 123.3** |
SGI O2 R5000PC/150 64 MB 1 GB 20" XGE 3.1 3.6 |
IBM 64 MB 2.1 GB 20" GXT250P 6.15 4.83 |
*SPECint95, **SPECfp95
|
Entry-Level Wireframe |
|||||
|
System Memory Disk Graphics SPECint95 SPECfp95 |
Solaris 2.x SS5/110 64 MB 1 GB 20" TurboGX 79* 65** |
DEC DPW 433au 128 MB 2.1 GB 21" 3D30 13 17 |
HP 712/80 64 MB 1 GB 20" Integ. 8 plane 97.1* 123.3** |
SGI O2 R5000PC/150 64 MB 1 GB 20" XGE 3.1 3.6 |
IBM 43P-166 64 MB 2.1 GB 20" GXT255P 6.15 4.83 |
|
Mid-Range Wireframe |
|||||
|
System Memory Disk Graphics SPECint95 SPECfp95 |
Solaris 2.x Ultra 1 M140 64 MB 1 GB 20" TurboGX 4.66 7.90 |
DEC DPW 433au 128 MB 4.2 GB 21" 4D20 13 17 |
HP 715/100 64 MB 2 GB 20" Integ. 8 plane 2.89 3.47 |
SGI O2 R1000/180 128 MB 1 GB 20" O2 Graphics 7.6 6.6 |
IBM 43P-200 128 MB 2.1 GB 20" GXT500P 7.79 5.43 |
|
Entry-Level Solids |
|||||
|
System Memory Disk Graphics SPECint95 SPECfp95 |
Solaris 2.x Ultra 1 M140E 128 MB 1 GB 20" Creator 4.66 7.90 |
DEC DPW 500au 192 MB 4.2 GB 21" 4D40T 15 18.5 |
HP B160L 128 MB 2 GB 20" Visualize 24 7.75 7.56 |
SGI O2 R10000/180 128 MB 1 GB 20" O2 Graphics 7.6 6.6 |
IBM 43P-200 128 MB 2.1 GB 20" GXT550P 7.79 5.43 |
|
High-End Solids |
|||||
|
System Memory Disk Graphics SPECint95 SPECfp95 |
Solaris 2.x Ultra 2 128 MB 2 GB 20" Creator3D 7.67 11.10 |
DEC DPW 600au 256 MB 4.2 GB 21" 4D50T |
HP C180 128 MB 2 GB 20" Visualize 48 11.8 18.7 |
SGI OCTANE R10K/195 128 MB 2 GB 20" Solid IMPACT 9.3 17 |
IBM 43P-140/233 128 MB 2.1 GB 20" GXT800P 3.31 9.35 |
* = SPECint92, ** = SPECfp92
