CADDS 5 Rev. 9.3 Hardware Requirements

Last Updated: March 20, 2000

SUMMARY OF SUPPORTED PLATFORMS

Compaq Alpha UNIX V4.0D

IBM AIX/6000 V4.2.1 or above, 4.3

SGI IRIX 6.5

Sun SPARC Solaris 2.5.1 (11/97), 2.6, 7

Windows NT 4.0 (Intel-based)

Sun Solaris Supported Configurations
	UltraSPARC Ultra 1 Ultra 2	Ultra10	Ultra 30 Ultra 60
Memory · Minimum · Standard · Maximum Performance	64MB 96MB 128MB	64MB 96MB 128MB	64MB 96MB 128MB
Disk	1 GB	1 GB	1 GB
Monitor	19"	19"	19"
Graphics Boards Run in X11 & OGL Mode - Unless Noted	TurboGX (MM140 & 170 Only) TurboGX+ (M140 & 170 Only) Creator Creator 3D	Creator Creator 3D Series 3 Elite3D m3	Creator Creator 3D Series 2, 3 Elite3D m3, m6
OS	Solaris 2.5.1, 2.6, 7	Solaris 2.5.1, 2.6, 7	Solaris 2.5.1, 2.6, 7
= SX Graphics Board REQUIRES 16MB of additional memory.
NOTES: CADDS 5 OpenGL and XGL modes are not supported on the TurboGX and Turbo GX+ graphics cards. Solaris 2.x, CDE and OpenGL utilize 32MB of the memory shown above Dial Boxes (Solaris 2.x) are supported in both Parametric and Explicit environments Spaceball Input Devices (Solaris 2.x) are supported in both Parametric and Explicit environments C Size table (Solaris 2.x) support is available (Explicit Environment only) DMENU (Solaris 2.x) support is available

Digital UNIX Supported Configurations
	Series 3000 700, 900 AXP	AlphaStation Series 200 Models 4/166, 4/233 Series 250 Model 4/266 Series 400 Model 4/233	AlphaStation 255/233 , 255/300, 500/333, 500/400, 500/500, 600 5/266, 600 5/333, 600 5/500	Digital Personal Workstations 433au, 500au, 600au
Memory · Minimum · Standard · Maximum Performance	64MB 96MB 192MB	64MB 96MB 192MB	64MB 96MB 192MB	64MB 96MB 192MB
Disk	1 GB	1 GB	1 GB	1 GB
Monitor	19"	19"	19"	19"
Graphics Boards (X11 Only)	ZLX-E1	ZLXp-E1	PowerStorm 3D10, 3D30	PowerStorm 3D30
Graphics Boards (X11 and OpenGL)	ZLX-E3 ZLX-L1 ZLX-L2 ZLX-M1 ZLX-M2	ZLXp-E3 ZLXp-L1 ZLXp-L2	PowerStorm 4D20, 4D40T, 4D50T, 4D60T ZLXp-L1, ZLXp-L2	PowerStorm 4D20, 4D40T, 4D50T, 4D60T
OS	Digital UNIX V4.0d	Digital UNIX V4.0d	Digital UNIX V4.0d	Digital UNIX V4.0d
Digital UNIX V4.0d, Motif and OpenGL takes 24MB of memory shown above DEC ULTRIX O/S Not Supported All Workstations also require Open3D v4.4 or higher Dial Box (DEC) - Supported in both Parametric and Explicit environments. Spaceball Input Device (DEC) - Supported in both Parametric and Explicit environments. C Size Tablets (DEC) Not Supported. DMENU (DEC) Support NOT Available.

Hewlett-Packard Supported Congigurations
	712/60 712/80 712/100	715/33 715/50 715/75 725/50 725/75 735/99 735/125 755/99 755/125	715/64 715/80 715/100 715/100XC 725/100	C100 C110 J200 J210	B132L B160L C160 C180 K460	B180 C200 C240 C360 J2240	VISUALIZE UNIX Workstations B1000 B2000 C3000 C3600 J5000 J5600
Memory · Minimum · Standard · Maximum Performance	48MB 64MB 128MB	48MB 64MB 128MB	48MB 64MB 128MB	48MB 64MB 128MB	48MB 64MB 128MB	48MB 64MB 128MB	48MB 64MB 128MB
Disk	1 GB	1 GB	1 GB	1 GB	1 GB	1GB	1GB
Monitor	19"	19"	19"	20"	20"	20"	20"
Graphics Boards (X11 & OGL)	8 plane on-board	8 plane (715 only) CRX24 CRX24Z CRX48Z	8 plane on-board HCRX8 HCRX24 Visualize 8 CRX48Z HCRX8Z HCRX24Z Visualize 24, 48	8 plane on-board Visualize 8 HCRX8Z HCRX24Z Visualize 24, 48, 48XP	Visualize 8, 24, 48 Visualize 48XP	Visualize fx2, fx4, fx6	Visualize-fx Pro (fx2, fxe, fx4, fx6)
OS	HP-UX 10.20	HP-UX 10.20	HP-UX 10.20	HP-UX 10.20	HP-UX 10.20	HP-UX 10.20 ACE1	HP-UX 10.20 ACE (JUNE 1999, DEC 1999)
HP-UX 10.20, OpenGL and PEX take 30MB of the memory shown above. 8 plane Graphics Boards may be accelerated in software with HP’s PowerShade Software. Dial Box (HP) - Supported in both Parametric and Explicit environments. Spaceball Input Device (HP) - Supported in both Parametric and Explicit environments. C Size Tablets (HP) Support is Available (Explicit Environment Only). DMENU (HP) Support is Available (Order Patch # HPDM5.1.1 from Services). Refer to the following WEB site HP-UX patchsets. http://www.hp.com/go/ptc

SGI IRIX 6.5 Supported Configurations
	Indy R5000PC R5000SC	O2 R5000PC R5000SC R10000	Indigo2 R4000/4400 R4600, R10000	OCTANE R10000 (175 or 195 MHz)
Memory · Minimum · Standard · Maximum Performance	48MB 64MB 256MB	48MB 64MB 1000MB	48MB 64MB 512MB	48MB 64MB 1000MB
Disk Minimum Maximum	1 GB 4 GB	1 GB 4 GB	1 GB 12 GB	1 GB 27 GB
Monitor	17", 20"	20"	20", 21"	20", 21", 24"
Graphics Boards (X11 Only)	XGE (8)
Graphics Boards (X11 & OpenGL)	XGE (24) XZ	O2 Graphics	XL, XZ, EXTREME, Solid Impact High Impact Maximum Impact	Solid Impact High Impact Maximum Impact
OS	IRIX 6.5	IRIX 6.5	IRIX 6.5	IRIX 6.5
SGI IRIX V6.5, Indigo MAGIC and OpenGL takes 25MB of the memory shown above. Dial Box (SGI) - Supported in both Parametric and Explicit environments. Spaceball Input Device (SGI) - Supported in both Parametric and Explicit environments. C Size Tablets (SGI) Not Supported. DMENU (SGI) Support NOT Available.

IBM Supported Configurations
	RS/6000 Serieis Workstations
CPU Type	Power2, Power3, PowerPC 604e 166MHz and higher
Memory · Minimum · Standard · Maximum Performance	48MB 64MB 256MB
Disk	2 GB
Monitor	17", 19", 20"
Graphics Boards X11 & OpenGL modes	GXT500P GXT550P GXT800P GXT800M GXT1000M1 GXT1000M2 GXT2000P GXT3000P
OS	AIX 4.2.1 & above, 4.3
Dial Box (IBM) - Supported in both Parametric and Explicit environments. Spaceball Input Device (IBM) - Supported in both Parametric and Explicit environments. C Size Tablets (IBM) Not Supported. DMENU (IBM) Support NOT Available.
Refer to following WEB site for IBM patchsets: http://www.rs6000.com/support/

Windows NT 4.0 Support

Intel Pentium (133 Mhz or greater) or DEC Alpha Microprocessor

64 MB or greater RAM

CD-ROM

1 GB disk drive in NTFS file format

Microsoft Windows NT 4.0

HTML Browser

2D graphics accelerator with minimum 4MB VRAM for increased performance

Dial Box, Spaceball, C-Size Tablets and DMENUs are NOT Supported

The following graphics cards have been tested with CADDS5

Intergraph RealIZM
ELSA GLoria

SUPPORTED PERIPHERALS FOR CADDS 5 Rev. 9.1

Tablet Support
System	Explicit	Parametric
Solaris 2.X	Yes	No
Digital UNIX 4.0	No	No
HP-UX 10.20	Yes	No
IRIX 6.5	No	No
AIX 4.3.1	No	No
Intel NT	No	No

Dialbox Support
System	Explicit	Parametric
Solaris 2.x	Yes	Yes
Digital UNIX 4.0	Yes	Yes
HP-UX 10.20	Yes	Yes
IRIX 6.2/6.3	Yes	Yes
AIX 4.3.1	Yes	Yes
Intel NT	No	No

Spaceball 3003 Support
System	Explicit	Parametric
Solaris 2.X	Yes	Yes
Digital UNIX 4.0	Yes	Yes
HP-UX 10.20	Yes	Yes
IRIX 6.2/6.3	Yes	Yes
AIX 4.2	Yes	Yes
Intel NT	No	No

CADDS 5 Rev. 9.3 Hardware Requirements

How Can We Help You?